Decking in Minnamurra, Built for Salt Exposure

Minnamurra sits on the narrow strip between the river and the ocean, just north of Kiama, and it is one of the most exposed pockets we work in. The housing is a mix of older cottages near the river and newer homes on the rise behind them, and almost all of it is within a few hundred metres of salt water on two sides.

That position is the whole story for decking here. It is the reason a deck that would last twenty years a few kilometres inland needs a different specification on this side of the Minnamurra River, and most of the difference is in parts you never see once the boards are down. Salt attacks the metal first, and corrosion at a fixing is worse than corrosion on a surface because the fixing is what holds the deck together. That is also why two quotes can look similar and describe very different decks.

Marcio is Wollongong based and the Kiama end of the coast is a regular run. Decking, carpentry, balustrades and the welding and fabrication behind them are all our own work, so on a coastal deck the metal choice and the galvanising are our call rather than a supplier's, which is where these decks usually fail.

Licensed
& Insured
Fast
Response
Genuinely
Local
Fair, Upfront
Pricing

“Finally found someone who actually turned up when he said he would!”

Sarah, Kiama

“Didn't try to upsell me on things I didn't need. Rare these days.”

Dave, Shellharbour

“Turned a weekend-long headache into a one-visit fix.”

Priya, Albion Park
What We Do

Decking Work We Do in Minnamurra

Matched Fixings for Minnamurra Salt Air

One metal family through the frame. Mixed stainless and galvanised in contact is what causes galvanic attack and early failure at the joins. The cost difference at build time is small. The difference in how long the frame holds together in this position is not, and it cannot be corrected later without dismantling the deck to get at the connections, which is why it is worth asking any builder about.

Timber Chosen for Exposure

Dense hardwoods handle salt and sun better than softer timbers. We will tell you what the maintenance cycle actually looks like in this position rather than quoting the interval off the back of a tin, because here it is shorter than the label suggests. Left alone the timber goes grey, which is weathering rather than damage.

Galvanising to the Standard

Steel components hot dip galvanised to AS/NZS 4680 rather than painted over bare steel, which fails first at the welds and the edges. A painted finish looks the same on day one and tells you nothing about what happens at the third summer. Because the fabrication is ours, that call is made rather than inherited.

Honest About Tea Staining

Both 304 and 316 can tea stain near the coast. It is surface discolouration, it cleans off, and nobody should be promising you it will not happen. What the grade does change is how the metal performs underneath, which is the part that matters and the part you cannot see once the deck is finished.

Get a price for your job
Our Work

Decks We Have Built Around the Illawarra

Matched stainless fixings through a coastal deck frame, with no galvanised brackets in contact.

What Salt Does to a Deck

Salt attacks the metal first. Screws, nails, joist hangers, post brackets, bolts and balustrade fittings all corrode faster in salt air, and corrosion at a fixing is worse than corrosion on a surface because the fixing is holding the deck together. Where two different metals touch, the problem speeds up a great deal. Stainless screws into galvanised brackets, or the reverse, sets up galvanic attack right at the join, and the damage is inside the connection where nobody will look.

So the rule here is to match the metals through the whole frame and pick the grade for the position. Both 304 and 316 stainless can tea stain near the coast, which is a surface discolouration rather than a structural problem, and it can be cleaned off. Aluminium does not rust but it pits in salt air, and it suffers galvanic attack where it touches stainless or steel, so aluminium components need matched fixings too. Anyone promising you a finish that will never mark in this position is overselling it.

Timber choice is the second part. Dense hardwoods handle coastal exposure better than softer timbers, and a board that gets salt spray and full sun needs oiling more often than the same board inland. That is a maintenance reality rather than a fault, and it is worth knowing before you choose. Left alone, a hardwood deck here will go grey, which is weathering rather than damage, and plenty of people are happy with it.

The third part is the finish on anything steel. A galvanised coating applied to AS/NZS 4680 handles exposure properly. A painted finish over bare steel does not, and it fails first at the welds and the edges, which looks identical on day one and tells you nothing about the third summer. Because the fabrication is ours, that decision is made rather than inherited, and a repair in a few years is a phone call instead of a search for whoever supplied the original parts.

More on decking, gates, handrails and balustrades, welding and fabrication and carpentry.

How Much Maintenance Does a Coastal Deck Need?

More than an inland one, and the honest answer is that it depends on how you want it to look.

A hardwood deck in this position will go grey if it is left alone. Grey is not damage, it is the surface weathering, and plenty of people are happy with it. If you want the colour, it needs oiling, and here that means more often than the tin suggests because salt and sun both work on the finish.

A rinse with fresh water every so often does more good than people expect, particularly on the fixings and the balustrade. Salt that sits on metal keeps working. Salt that gets washed off does not.

Composite boards cut the surface maintenance down a lot. They still need a wash, they still fade, and they do not remove the need for the frame and the fixings to be right. The frame is where coastal decks fail, not the boards.

We would rather set your expectations properly at quoting stage than have you find out in year three that the deck needs more attention than you were told.

Thinking about a deck in Minnamurra?

Send through photos of the area and the rough size you have in mind, and you will get a straight answer on what it involves and what it costs.

Call 0413 147 335

Contracts, Deposits and What NSW Asks For

Renovation work in NSW comes with consumer protections worth knowing before you sign anything. A written contract is required once the contract price is over $5,000 including GST. Work between $5,000 and $20,000 can run under a small works contract; above $20,000 it needs a full home building contract, and home building compensation cover with the certificate that goes with it. The maximum deposit anyone can ask for is 10 per cent, on a small job or a large one. Variations should be agreed in writing before the varied work happens, not reconciled at the end. None of that is unique to us, and you should expect it from whoever you use.

Quoting a Minnamurra Deck

Every job gets quoted on what it actually needs. We look at the access, the condition of what is already there, the materials you want and how much of the existing work can be kept, then give you a figure before anything starts. Two jobs that look identical in photos can be very different once someone is standing in the room, so we do not publish a rate card. You get a price for your job, and it does not move once we have agreed it.

Minnamurra sits just north of Kiama, with Kiama Downs, Shell Cove and Jamberoo all a short drive away. Work at the southern end of our area gets batched across those suburbs where the timing allows, which keeps travel reasonable on a job this far from the workshop. A first look here means standing in the spot and working out how much salt wind it actually takes, because exposure varies street to street and it decides the whole specification.

Plumbing and electrical work is carried out by licensed partners, not in-house.

Questions

Minnamurra Decking Questions

What fixings should a coastal deck use?+

Fixings matched to each other and to the position, rather than whatever is cheapest. The mistake we see most often is a mix, with stainless screws into galvanised brackets or galvanised screws into stainless fittings, which sets up galvanic attack at the contact point and gets much worse in salt air. Matching them through the whole frame costs very little at build time and it is the single biggest thing you can do for the life of a coastal deck. It is also impossible to correct later without dismantling it, so it is worth asking about before you compare prices.

Does stainless steel stain near the beach?+

Yes, and both 304 and 316 can do it. It is called tea staining, it is a brown discolouration on the surface, and it looks like rust without being structural. It can be cleaned off and it comes back. Anyone telling you a particular grade will never mark in this position is overselling it. What the grade does affect is how the metal performs underneath, which is the part that matters, and a rinse with fresh water slows the staining down noticeably at no cost.

How do I get a deck quoted in Minnamurra?+

Photos of the area, the rough size, and how exposed the position is. A deck with a clear line to the water gets a different specification to one tucked behind the house, and that difference is worth getting right in the quote rather than discovering it in the third summer. If there is an existing deck coming out, photos of its frame and fixings tell us a lot about what the position actually does to metal. You get the exclusions listed in writing before anything starts. Call 0413 147 335.

Do you make the balustrade and any steel yourself?+

Yes. Welding and fabrication are our own work, so steel posts, frames and balustrades are made and finished here rather than bought in. On a coastal deck that means we control the metal choice and the galvanising, which is where these decks usually fail. It also means a repair in a few years is a phone call rather than a search for whoever supplied the original parts and whether they still make them.

“Finally found someone who actually turned up when he said he would!”
Sarah, Kiama
“Cheerful, quick, and didn't try to upsell me on things I didn't need. Rare these days.”
Dave, Shellharbour
“Turned a weekend-long headache into a one-visit fix. Absolute legend.”
Priya, Albion Park
Free, No-Obligation

Get a Free Quote for Decking in Minnamurra

Call now0413 147 335 Get a quote